Setting Parameters

  1. Double-click graphics\KEYOPMENUICON16.gif.

  2. From the Keyop Menu, double-click graphics\PARAMETERS_ICON16.gif.

  3. In the Parameter Editor window, double-click Text Base Parameters.

  4. The (L) Parameters screen opens. Select the [M] Operational Procedures action code.

  5. In the (LM) screen, select the [2] Proc List action code.

  6. When the (LM2) screen opens, select the [C] Change action code.

  7. When the cursor moves to the Category field, accept the default or enter the category you are setting up. You can create categories for letters A through Z.

  8. After you enter a category, the cursor moves to the Category Title field. Enter the appropriate responses in each of the fields in this screen. For a description of the fields, see In the (LM2) Screen. Use the following instructions for cursor movement in this screen:

    To move the cursor ahead one field, press Tab.
    To clear a field, press the Spacebar, and then press Tab.
    To move the cursor back one field, press Backspace.

  9. When you finish setting or changing parameters in this screen, press Enter until the cursor returns to the action code field. If you press Esc before doing so, the system does not save your changes.