Setting Parameters

  1. Double-click graphics\KEYOPMENUICON16.gif.

  2. From the Keyop Menu, double-click graphics\PARAMETERS_ICON16.gif.

  3. In the Parameter Editor window, double-click Text Base Parameters.

  4. The (L) Parameters screen opens. Select the [G] Order Entry action code.

  5. Select the [C] Furniture action code.

  6. In the (LGC1) screen, select the [C] Change action code.

  7. In the G/L Location field, you enter the location for which to set the parameters. (This field defaults to the location entered for the terminal you are using in the (L1) Terminal and Tickets Parameters screen.) You can enter a new location or accept the default location:

    To accept the default location, press Tab.
    To set parameters for a different location, enter the number. If you enter fewer than two characters, press Tab.

Note: Your responses to the fields in the (LGC1) screen apply only to the location you specify in the G/L Location field.

  1. When the cursor moves to the Next Project # field, enter the appropriate responses in each of the fields in this screen. For a description of the fields, see In the (LGC1) Screen. Use the following instructions for cursor movement in this screen:

    To move the cursor ahead one field, press Tab.
    To clear a field, press the Spacebar, and then press Tab.
    To move the cursor back one field, press Backspace.

  2. When you finish changing the parameters in this screen, press Enter so that the cursor returns to the action code field. If you press Esc before doing so, the system does not save your changes.