Setting Parameters

Setting (L5T) Screen Parameters

1. Double-click .

2. From the Keyop Menu, double-click .

3. In the Parameter Editor window, double-click Text Base Parameters.

4. The (L) Parameters screen opens. Select the [5] State Tax Tables action code.

5. In the (L5) screen, select the [T] Tables action code.

6. When the (L5T) screen opens, select the [C] Chg action code.

7. In the Loc field, enter the location for which to set or change parameters. (This field defaults to the location entered for your terminal in the (L1) Terminal and Tickets Parameters screen.) You can enter a new location or accept the default location:
   
   To accept the default location, press Tab.
   To set parameters for a different location, enter the number. If you enter fewer than two characters, press Tab.

8. In the Tables field, enter the table for which you are setting or changing parameters. If you do not completely fill the field with characters, press Tab.

9. When the cursor moves to the Description field, enter the appropriate responses in each of the fields in this screen. For a description of the fields, see In the (L5T) Screen. Use the following instructions for cursor movement in this screen:
   
   To move the cursor ahead one field, press Tab.
   To clear a field, press the Spacebar, and then press Tab.
   To move the cursor back one field, press Backspace.

10. When you finish setting or changing parameters in this screen, press Enter until the cursor returns to the action code field. If you press Esc before the cursor moves through all the fields in this screen, the system does not save your changes.