About Credit Card Processing and Approval Link 4

In the (+VJ) screen, you must assign each of your workstations or users a terminal ID and a text-based ID. The text-based ID denotes the group to which each workstation is assigned in the Approval Link Configuration program. For example, you might have three workstations (T1, T2, T3) assigned to G, which is the Net1 server.

  1. In the (+V) screen, type J in the Requested Action field.

  2. In the (+VJ) screen, type A.

  3. In the Terminal ID field, assign a code to the terminal to set up. For example, enter T3. Make sure the (+VJ) terminal ID matches the AppLinkUtil_key=$G field from the UtilExt_AppLink.ini file.

  4. In the Text Based ID field, type G.

  5. At the Are You Sure prompt, type Y.

  6. To add more terminals, repeat Steps 1 through 5. When finished, press Esc twice to return to the (+V) screen.

Note: Terminals not set up in the (+VJ) screen cannot communicate with Net1.

Return to:

Setting Up the DDMS Client for Approval Link 4

 

See also:

Configuring the Utility Extension Program for Approval Link 4