Setting Parameters

Setting (LF) Screen Parameters

1. Double-click .

2. From the Keyop Menu, double-click .

3. In the Parameter Editor window, double-click Text Base Parameters.

4. The (L) Parameters screen opens. Select the [F] Purchase Orders action code.

5. When the (LF) screen opens, select the [C] Chg action code.

6. In the G/L Loc field, enter the location for which to set or change parameters. (This field defaults to the location entered for your terminal in the (L1) Terminal and Tickets Parameters screen.) You can enter a new location or accept the default location:
   
   To accept the default location, press Tab.
   To set parameters for a different location, enter the number. If you enter fewer than two characters, press Tab.

7. When the cursor moves to the Next P/O # field, enter the appropriate responses in each of the fields in this screen. For a description of the fields, see In the (LF) Screen. Use the following instructions for cursor movement in this screen:
   
   To move the cursor ahead one field, press Tab.
   To clear a field, press the Spacebar, and then press Tab.
   To move the cursor back one field, press Backspace.

8. When you finish changing parameters in this screen, press Enter until the cursor returns to the action code field. If you press Esc before doing so, the system does not save your changes.