Setting Parameters

  1. Double-click graphics\KEYOPMENUICON16.gif.

  2. From the Keyop Menu, double-click graphics\PARAMETERS_ICON16.gif.

  3. In the Parameter Editor window, click Text Base Parameters.

  4. The (L) Parameters screen opens. Select the [7] Compensation action code.

  5. The Compensation or Level Parameters prompt appears. Type L.

  6. The system displays the (L7L) screen, and the cursor moves to the action code field. Select the [D] Delete action code.

  7. The cursor moves to the G/L Loc field. This field defaults to location 1. Press Tab to accept the default location or enter the location for which to delete level compensation tables.

  8. The cursor moves to the Slsm field. At this point, you can delete the level global compensation table, specify a range of salespersons, or specify a specific salesperson.

    To delete the global compensation table, tab through the Slsm field and the corresponding To field to leave them blank.

    To delete a compensation table for a range of salespersons, enter the first salesperson number in the Slsm field, and the last salesperson number in the corresponding To field.

    To delete a compensation table for a specific salesperson, enter that salesperson number in the first field and press Enter.

Note: If you specify salesperson numbers for which no table exists, the No Table for [xxxx] to [xxxx] message appears. (The xxxx in this message is replaced by the salesperson numbers you specified.) The cursor returns to the action code field so that you can begin again.

  1. At the Delete ALL Tables message, you can delete all the tables for the specified salespersons, all the lines in a table, or specific lines from a table.

    Type Y to delete all tables for the salesperson numbers specified. The system briefly displays the tables you deleted. Go to Step 9.

    Type N (default) to skip deleting all tables for the salesperson numbers specified. Go to Step 8.

  1. If you specify N at the Delete All Tables message, the cursor returns to the Negative Compensation field. Tab through this field and the Split Comp field.

    The system displays the Delete ALL Lines for Cust. Status [X] to [Y] Paycode [Z] message. At this point, you can delete all the lines in a table with the status and salesperson range you specified or delete specific lines. To delete ALL lines on the table, type     Y at this message. To delete only specific lines, type N. For details on deleting specific lines, see the following bullet:

    If you specified a customer status range that does not apply to a table with the salesperson range you specified or typed N at the Delete ALL Lines message, the system displays the first line of the table you specified, along with the Delete this Line     message. At this point you can delete the displayed line. To do so, type Y. The system deletes the line, displays the next line in the table, and repeats the Delete This Line message. You can continue to delete as many lines as necessary.

  2. When you finish deleting tables and lines, the cursor returns to the action code field.

See also:

Setting (L7L) Screen Parameters

Changing (L7L) Screen Parameters

Inserting (L7L) Screen Lines in a Compensation Table

Copying (L7L) Screen Compensation Tables